Compare Products

2019 Cub Cadet Pro Z 548L KW
2019 Cub Cadet Pro Z 548L KW

Specs

General Information

Manufacturer
Cub Cadet
Cub Cadet
Model Year
2019
2019
Model
Pro Z 548L KW
Pro Z 548L KW
Model Code
53RIHJTK050
53RIHJTK050
Color
Cub Cadet Yellow
Cub Cadet Yellow

Body

Frame

Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots

Rear bumper - 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch

Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots

Rear bumper - 5/16 in. Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch

Seat
High-back dial suspension with EVC Cushion seat belt angle back adjust arm rests
High-back dial suspension with EVC Cushion seat belt angle back adjust arm rests
Rollover Protection (ROPS)
2 x2 in. Foldable 3 Position Low Profile Clearance
2 x2 in. Foldable 3 Position Low Profile Clearance

Drivetrain

Transmission/Drive
Parker HTJ Series 12cc pump / 260cc wheel motor
Parker HTJ Series 12cc pump / 260cc wheel motor
Travel Speed

Forward - 10 mph

Reverse - 5 mph

Forward - 10 mph

Reverse - 5 mph

Axles
Front - 2 x 3 in. solid steel and 3/8 in. thick steel with sealed ball bearing front yokes
Front - 2 x 3 in. solid steel and 3/8 in. thick steel with sealed ball bearing front yokes
Wheels/Tires

Anti-Scalping - 2 Front HD with Bushings & Grease Zerk

Front - 13 x 6.5 - 6 in. (smooth)

Rear - 24 x 12 - 12 in. (Turf Tread)

Anti-Scalping - 2 Front HD with Bushings & Grease Zerk

Front - 13 x 6.5 - 6 in. (smooth)

Rear - 24 x 12 - 12 in. (Turf Tread)

Brakes
Parking - Hand-operated lever with integrated hydro pump release lever
Parking - Hand-operated lever with integrated hydro pump release lever

Engine

Engine Make
Kawasaki
Kawasaki
Engine Model
FX FX730
FX FX730
Horsepower
23.5 hp
23.5 hp
Displacement
726 cc
726 cc

Measurements

Length
With discharge chute UP and ROPs DOWN - 80 in.
With discharge chute UP and ROPs DOWN - 80 in.
Height
With discharge chute UP and ROPs DOWN - 50 in.
With discharge chute UP and ROPs DOWN - 50 in.
Width
With discharge chute UP and ROPs DOWN - 50 in.

With discharge chute UP and ROPs DOWN - 50 in.

Weight
1,272 lb.
1,272 lb.
Mowing Width
48 in.
48 in.
Mowing Height Range
1 - 5 in.
1 - 5 in.
Fuel Tank Capacity
Twin 7.45 gal. (14.9 gal. total) with dial gauge
Twin 7.45 gal. (14.9 gal. total) with dial gauge

Operational

Instrumentation

Hour meter - Standard electronic

Cup holder - Intergrated into Side Pod

Hour meter - Standard electronic

Cup holder - Intergrated into Side Pod

Steering
3/4 length padded bars with tooless quick adjust dial
3/4 length padded bars with tooless quick adjust dial
Safety Features
Operator presence
Operator presence

Other

Deck Construction

Top reinforcement(s) - 2 ga. and 11 ga. top plate

Bottom reinforcement- 7ga. (0.187 in.) bottom plate

Trim-Side Wear Guard - 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard

Size - 48 in. Fabricated

7ga. top plate 7ga. bottom reinforcement ¼ in. rolled leading edge

Fully welded 10 ga. (0.135 in.) steel deck shell with reinforcements totaling 0.560 in.

Foot pedal with spring assist 16 Positions

Side - 5/16 in. (0.313) steel on trim and discharge sides

Top reinforcement(s) - 2 ga. and 11 ga. top plate

Bottom reinforcement- 7ga. (0.187 in.) bottom plate

Trim-Side Wear Guard - 3/4 in. Thick UHMW-PE Replaceable Trim-side Wear Guard

Size - 48 in. Fabricated

7ga. top plate 7ga. bottom reinforcement ¼ in. rolled leading edge

Fully welded 10 ga. (0.135 in.) steel deck shell with reinforcements totaling 0.560 in.

Foot pedal with spring assist 16 Positions

Side - 5/16 in. (0.313) steel on trim and discharge sides

Spindles

Construction - 8 in. sealed cast aluminum housing (maintenance-free)

Covers - Steel - Tooless Quick Release

Construction - 8 in. sealed cast aluminum housing (maintenance-free)

Covers - Steel - Tooless Quick Release

Blades
(3) High-lift Marbain®
(3) High-lift Marbain®
Blade Brake Clutch
Approx. - 18,500 fpm
Approx. - 18,500 fpm
Discharge
Chute - High-density, impact-resistant rubber
Chute - High-density, impact-resistant rubber
PTO
Warner Clutch - 125 ft. lb.
Warner Clutch - 125 ft. lb.
Warranty
2-year limited commercial (no hour limitations) or 4-year / 500-hour limited residential
2-year limited commercial (no hour limitations) or 4-year / 500-hour limited residential

Features

Features

  • CUSTOM LAP BAR DESIGN: Oversized zero-turn lap bars with quick-adjust knobs, full-length comfort grips and integrated automatic parking brake system reduces operator fatigue.
  • BEST-IN-CLASS DECK: Tackle the toughest conditions with the industry-leading only triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements. Designed for durability, our decks produce a quality cut you can always count on.
  • MAINTENANCE MADE EASIER: Slash downtime thanks to Cub Cadet’s new spindle design. Completely sealed, dual double-row ball bearings make the spindle maintenance-free for its lifetime, and anti-friction washers prevent self-tightening, making blade maintenance easier.
  • ALL-DAY COMFORT: The PRO Z has been engineered to absorb the punches so your body doesn’t have to. Our exclusive air-ride seat allows you to adjust seat firmness to your personal preference for a smooth ride all day long.
  • BEEFED-UP FRONT END: Absorb the impact of rough terrain with new front-end construction featuring a best-in-class combination of axle, hub and yoke size. With an isolation-dampening system and maintenance-free ball bearings, the PRO Z is designed to handle the rigors of the job.

Features

  • CUSTOM LAP BAR DESIGN: Oversized zero-turn lap bars with quick-adjust knobs, full-length comfort grips and integrated automatic parking brake system reduces operator fatigue.
  • BEST-IN-CLASS DECK: Tackle the toughest conditions with the industry-leading only triple-7-gauge steel cutting deck: a 7-gauge deck shell with 7-gauge top and bottom reinforcements. Designed for durability, our decks produce a quality cut you can always count on.
  • MAINTENANCE MADE EASIER: Slash downtime thanks to Cub Cadet’s new spindle design. Completely sealed, dual double-row ball bearings make the spindle maintenance-free for its lifetime, and anti-friction washers prevent self-tightening, making blade maintenance easier.
  • ALL-DAY COMFORT: The PRO Z has been engineered to absorb the punches so your body doesn’t have to. Our exclusive air-ride seat allows you to adjust seat firmness to your personal preference for a smooth ride all day long.
  • BEEFED-UP FRONT END: Absorb the impact of rough terrain with new front-end construction featuring a best-in-class combination of axle, hub and yoke size. With an isolation-dampening system and maintenance-free ball bearings, the PRO Z is designed to handle the rigors of the job.